The production and processing process of aluminum plates.

Aluminum plate refers to a rectangular plate made by rolling aluminum ingots. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. It has a wide range of applications, especially the construction industry cannot do without this material. At present, the production and processing of aluminum plates have strict specifications. Let's take a look at the production and processing process of aluminum plates in detail.

1. Ingredients: According to the order received by the factory, select the data model, specification, and color, and then transport it to the cutting machine and wait for it to be cut.

2. Cutting: When cutting, first adjust the locator to the required scale. After cutting a small point, check whether the scale matches the required scale. When it does, start cutting, and vice versa. The fit stops. When cutting, the direction should be accurate. From left to right, from top to bottom, reverse cutting is prohibited; at the end of the incision, check to see if it meets the specifications, and then place the plate gently in the cleaning channel for cleaning to prevent damage to the plate finish.

3. Grooving: When grooving, it should be noted that the processing diagram must be analyzed, confirmed and finalized again.

4. Corner cutting: punching on the punching machine, the cutting corner is not allowed to exceed the center line of the planing groove.

5. Bending: Be careful not to bend repeatedly, and bend twice at most to prevent fatigue damage.

6. Assembling and stiffening: Firstly prepare the materials and things for assembling the board, and pay attention to the process of assembling the board so as not to damage the finish of the board.

7. Re-inspection: Conduct a re-inspection of the finished aluminum plate to see if it meets the manufacturing specifications and prevent the factory from having a bad effect when it leaves the factory.

Send Inquiry